Revert #1136 and use actionslib instead.
revert chore: bump the module path to `/v3`, take the version from the VCS stamp (#1136)
gitea can not consume the runner's api by version while it's version mismatches the module version:
```
go: gitea.com/gitea/runner@v3.0.1: invalid version: module contains a go.mod file,
so module path must match major version ("gitea.com/gitea/runner/v3")
```
Fix that by bumping the module version now. The existing `v3.0.0` and `v3.0.1` tags stay unusable, so a new tag is needed after this lands.
Also drop the version `-X` linker flags, which would otherwise have to repeat the new path in both `Makefile` and `.goreleaser.yaml`, where a stale path makes injection silently no-op. Go has recorded the module version in the build info since 1.24, so `Version()` reads it from there, keeping the variable as an override for builds without a VCS stamp.
That part started as https://gitea.com/gitea/runner/pulls/1137 but belongs here: the stamp resolves against the tags that are legal for the module path, so without the `/v3` bump it would report `v1.0.9-0.<ts>-<sha>`. Since `release-nightly.yml` triggers on every push to `main`, splitting them would publish a nightly with a `v1` version.
---------
Co-authored-by: bircni <bircni@icloud.com>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1136
Reviewed-by: techknowlogick <9+techknowlogick@noreply.gitea.com>
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <me@silverwind.io>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1148
Reviewed-by: Zettat123 <39446+zettat123@noreply.gitea.com>
gitea can not consume the runner's api by version while it's version mismatches the module version:
```
go: gitea.com/gitea/runner@v3.0.1: invalid version: module contains a go.mod file,
so module path must match major version ("gitea.com/gitea/runner/v3")
```
Fix that by bumping the module version now. The existing `v3.0.0` and `v3.0.1` tags stay unusable, so a new tag is needed after this lands.
Also drop the version `-X` linker flags, which would otherwise have to repeat the new path in both `Makefile` and `.goreleaser.yaml`, where a stale path makes injection silently no-op. Go has recorded the module version in the build info since 1.24, so `Version()` reads it from there, keeping the variable as an override for builds without a VCS stamp.
That part started as https://gitea.com/gitea/runner/pulls/1137 but belongs here: the stamp resolves against the tags that are legal for the module path, so without the `/v3` bump it would report `v1.0.9-0.<ts>-<sha>`. Since `release-nightly.yml` triggers on every push to `main`, splitting them would publish a nightly with a `v1` version.
---------
Co-authored-by: bircni <bircni@icloud.com>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1136
Reviewed-by: techknowlogick <9+techknowlogick@noreply.gitea.com>
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <me@silverwind.io>
Leaked per-job networks each hold a subnet of the daemon's address pool and nothing reclaimed them, so a host eventually fails every job with `all predefined address pools have been fully subnetted`. This is what CI hit in https://gitea.com/gitea/runner/actions/runs/742177.
- teardown no longer loses a container, and its network with it: a failed `ContainerRemove` was reported as success, a container whose id was never learned was skipped, and the daemon's own `AutoRemove` teardown was raced
- the idle cleanup reclaims what teardown cannot: networks carry `com.gitea.runner.uuid`, so a runner only touches its own, and a cutoff keeps a job starting during the pass out of scope
- pull failures reported mid-stream were discarded, surfacing later as a confusing `No such image`; they now propagate, and fall back to a local copy instead of failing the job
- `NetworkCreate` retries pool exhaustion briefly, then says which knobs to turn
- digest-pinned images are not re-pulled, and removal kills first so it never waits out Podman's stop timeout (measured 10.1s → 0.09s per container)
---------
Co-authored-by: bircni <bircni@icloud.com>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1124
Reviewed-by: bircni <bircni@icloud.com>
Fixes#1023.
## Problem
In Windows host mode, a single stalled delete syscall (AV/EDR filter driver, unresponsive mount, dying disk) wedged the job forever at `Cleaning up container`. `HostEnvironment.Remove()` bounds every teardown phase (`terminateRunningProcesses`, both `removePathWithRetry` calls) except the `CleanUp` callback — an unbounded `os.RemoveAll(miscpath)` assigned in `startHostEnvironment`. The runner then held its capacity slot indefinitely, the task was reaped as a zombie, and there were no diagnostics.
## Fix
- **Bound the cleanup (availability):** `Remove()` now runs `CleanUp` under `hostCleanupTimeout` (30s) via `runWithTimeout`; on timeout it logs a warning and continues job completion. The stuck goroutine is left to finish (a delete syscall can't be interrupted). Added debug logs around the phase.
- **Reclaim the leak (disk hygiene):** a timed-out cleanup can leave a scratch dir behind, so the existing idle stale-dir sweep is extended to also remove orphaned host-mode scratch dirs (16-hex names) under `Host.WorkdirParent`, leaving the shared `tool_cache` and operator data untouched. The `bind_workdir` gate is dropped from `shouldRunIdleCleanup` so host-mode runners run the sweep.
Reviewed-on: https://gitea.com/gitea/runner/pulls/1024
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
- Add idle-time cleanup for stale bind-workdir task directories instead of cleaning them on the task execution path.
- Make cleanup behavior configurable with `runner.startup_cleanup_age` as the stale-age threshold (default: `24h`) and `runner.idle_cleanup_interval` as the idle cleanup cadence (default: `10m`).
- Restrict cleanup scope to numeric task directory names only, to avoid touching operator-managed folders.
- Document the cleanup settings in `config.example.yaml` and `README.md`.
- Add tests for stale-directory cleanup, idle cleanup throttling, and config default/override parsing.
## Why
When a runner or host crashes, normal per-task cleanup may not run, leaving stale task directories under the bind-workdir root. Running this cleanup only while the runner is idle recovers that disk space without adding overhead to active job execution.
If you want, I can also tighten the wording around `startup_cleanup_age`, since the key name now reads a bit misleadingly relative to the actual behavior.
---------
Co-authored-by: silverwind <me@silverwind.io>
Reviewed-on: https://gitea.com/gitea/runner/pulls/870
Reviewed-by: silverwind <2021+silverwind@noreply.gitea.com>
