This commit adds a new `LoadDockerAuthConfigs` function, which loads all
registry auths that are configured on the host and sends them with the build
command to the docker daemon.
This is needed in case act builds a docker action and the images referenced in
that docker action are located on private registries or otherwise require
authentication (e.g. to get a higher rate limit).
The code is adapted from how the docker cli works:
https://github.com/docker/cli/blob/257ff41304bf121bdf1acdf00a1c7a896ed038d1/cli/command/image/build.go#L323-L332
Co-authored-by: Markus Wolf <[email protected]>
Co-authored-by: Markus Wolf <[email protected]>
* test: define test case of path issues
Test case for #1528
* test: add multi arch grep
* fix: Always use current ExtraPath
* replace setup-node with run step
* Update push.yml
* yaml mistake
Co-authored-by: Markus Wolf <[email protected]>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
2023-01-10 21:55:05 +00:00
Markus WolfGitHubmergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
Since reusable workflows are defining inputs and ouputs using the
on.workflow_call syntax, this could also be triggered by a workflow_call
event. That event does not exist within GitHub and we should make
sure our worklow is not called by that kind of 'synthetic' event.
See https://github.com/nektos/act/pull/1423/files/74da5b085c0c4d08c5e5bf53501e555cb585b26c#r1042413431
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
2023-01-10 21:43:12 +00:00
Markus WolfGitHubmergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* fix: preserve job result state in case of failure
There is just one job field for the job result. This is also true for
matrix jobs. We need to preserve the failure state of a job to
have the whole job failing in case of one permuation of the matrix failed.
Closes#1518
* test: remove continue-on-error on job level
This feature is not yet supported by act and if implemented
would make this test invalid
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
Shouldn't provide token when cloning actions, the token comes from the instance which triggered the task, it might be not the instance which provides actions.
For GitHub, they are the same, always github.com. But for Gitea, tasks triggered by a.com can clone actions from b.com.
Reviewed-on: https://gitea.com/gitea/act/pulls/6
Reviewed-by: Lunny Xiao <[email protected]>
Co-authored-by: Jason Song <[email protected]>
Co-committed-by: Jason Song <[email protected]>
* Support "result" on "needs" context.
This change adds "result" to a job's "needs" context, as documented [here](https://docs.github.com/en/actions/learn-github-actions/contexts#needs-context). `act` currently tracks the success/failure/cancelled status of a job, but does not include this value the `needs` context.
Fixes#1367
* Change `Needs` to use a new struct rather than the open type `interface{}`.
Related #1497Fixes#1367
* Add integration test to "needs" context change.
Relates: #1497
* feat: allow to spawn and run a local reusable workflow (#1423)
* feat: allow to spawn and run a local reusable workflow
This change contains the ability to parse/plan/run a local
reusable workflow.
There are still numerous things missing:
- inputs
- secrets
- outputs
* feat: add workflow_call inputs
* test: improve inputs test
* feat: add input defaults
* feat: allow expressions in inputs
* feat: use context specific expression evaluator
* refactor: prepare for better re-usability
* feat: add secrets for reusable workflows
* test: use secrets during test run
* feat: handle reusable workflow outputs
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* refactor: fix savestate in pre steps (#1466)
* refactor: fix savestate in pre steps
* fix pre steps collision
* fix tests
* remove
* enable tests
* Update pkg/runner/action.go
* Rename InterActionState to IntraActionState
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* fix: tail (not absolute) as entrypoint of job container (#1506)
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Fix conflict in merge.
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* feat: allow to spawn and run a local reusable workflow
This change contains the ability to parse/plan/run a local
reusable workflow.
There are still numerous things missing:
- inputs
- secrets
- outputs
* feat: add workflow_call inputs
* test: improve inputs test
* feat: add input defaults
* feat: allow expressions in inputs
* feat: use context specific expression evaluator
* refactor: prepare for better re-usability
* feat: add secrets for reusable workflows
* test: use secrets during test run
* feat: handle reusable workflow outputs
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* fix: step env is unavailable in with property expr
* don't run the test on windows
* fix: composite action add missing shell
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* refactor: share UpdateFromEnv logic
* Add test for GITHUB_OUTPUT
Co-authored-by: Ben Randall <[email protected]>
* Add GITHUB_STATE test
* Add test for the old broken parser
Co-authored-by: Ben Randall <[email protected]>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* refactor: move autoremove into the jobexecutor
breaking: docker container are removed after job exit
* reduce complexity
* remove linter exception
* reduce cyclic complexity
* fix: always allow 1 min for stopping and removing the runner, even if we were cancelled
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* feat: interpolate the step names
Step names could contain expressions refering to event data.
Fixes#1353
* test: add missing mock data
* fix: setup composite expression evaluator
The RunContext does contain a cached ExpressionEvaluator.
This should be the case the composite RunContext as well.
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
Co-authored-by: Casey Lee <[email protected]>
* feat: set-state and set-output file commands
* increase test timeout from 10m to 15m
* Prepare for HostExecutor PR
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* fix: keep path to event json file in composite actions
The event.json paths need to be copied over, since it the
GithubContext is recreated from the composite RC. And that
does read some value for the event file if available.
* test: add test case
* test: paste the test correctly and revert a line
Co-authored-by: ChristopherHX <[email protected]>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
This change does parse the different types of workflow jobs.
It is not much by itself but the start to implement reusable
workflows.
Relates to #826
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
2022-11-01 15:58:07 +00:00
Eng Zer JunGitHubmergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
The io/ioutil package has been deprecated as of Go 1.16 [1]. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
[1]: https://golang.org/doc/go1.16#ioutil
Signed-off-by: Eng Zer Jun <[email protected]>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* test: check workflow_dispatch inputs
This implements a test to check for `workflow_dispatch` inputs.
This will be a prerequisite for implementing the inputs.
* feat: map workflow_dispatch input to expression evaluator
This changes adds the workflow_dispatch event inputs
to the `inputs` context and maintaining the boolean type
* fix: coerce boolean input types
* fix: use step env if available, rc env otherwise
* test: add test for networking setup in act
This test makes sure that the hostname inside of act is resolvable.
* fix: only merge existing container options
When merging parsed container options without options being
set in a job, the default docker options are returned and
will override the expected defaults by act (e.g. network mode).
This is a first attempt to mitigate this behavior and only
merge settings if something was requested on a job.
* refactor: split config merging into own function
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
The env for remote composite actions need to be re-evaluated
at every stage (pre, main, post) as it is created during the
pre stage but there might be changes used as input to this
actions main stage (e.g. outputs for another action).
This is not required for local actions as their env is created
for the main stage (there is no pre stage).
Post stages do not need an updated env since they cannot recieve
inputs from other actions.
* fix: support docker create arguments from container.options (#1022)
* fix processing of errors, add verbose logging, fix test
* disable linter for code copied from docker/cli
* fix all linter issues
* Add license info
* Add opts_test.go from docker/cli and required testdata
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* test: add test case for #1319
* fix: setup of composite inputs
This change fixes the composite action setup handling of inputs.
All inputs are taken from the env now. The env is composed of
the 'level above'.
For example:
- step env -> taken from run context
- action env -> taken from step env
- composite env -> taken from action env
Before this change the env setup for steps, actions and composite
run contexts was harder to understand as all parts looked into
one of these: parent run context, step, action, composite run context.
Now the 'data flow' is from higher levels to lower levels which should
make it more clean.
Fixes#1319
* test: add simple remote composite action test
Since we don't have a remote composite test at all
before this, we need at least the simplest case.
This does not check every feature, but ensures basic
availability of remote composite actions.
* refactor: move ActionRef and ActionRepository
Moving ActionRef and ActionRepository from RunContext into the
step, allows us to remove the - more or less - ugly copy operations
from the RunContext.
This is more clean, as each step does hold the data required anyway
and the RunContext shouldn't know about the action details.
* refactor: remove unused properties
ChristopherHXandGitHub
Jason SongandLunny Xiao
appleboy
Jason SongandJason Song
fuxiaoheiandJason Song
Randolph ChungandGitHub
Zack WangandGitHub
