`ACTIONS_RESULTS_URL` names one origin serving every `github.actions.results.api.v1` service. Gitea serves the artifact half and this runner the cache half, so announcing `ACTIONS_CACHE_SERVICE_V2` while that URL pointed at Gitea was a promise the environment could not keep, and `docker buildx` posted its cache calls at Gitea and got a 404.
The cache server now forwards the artifact half to the instance each job registers with, so it is the whole results service and jobs are pointed at it. The announcement follows, and the bundle patch follows the cache URL instead.
Also fixes three things no JavaScript client reached: camelCase in the v2 responses where the Go clients read proto names, the missing `x-ms-request-id` on blob uploads that panics buildkit, and `cache.external_server` passed through without the trailing slash the v1 client concatenates onto.
Tests run the real actions against the services they look for: `actions/cache` over both API versions, the artifact actions up and back down through the forwarding, and `setup-node`. The regression itself is covered by asserting that whatever a job is handed as `ACTIONS_RESULTS_URL` answers a cache service call.
Fixes https://gitea.com/gitea/runner/issues/1139
Reviewed-on: https://gitea.com/gitea/runner/pulls/1141
Reviewed-by: bircni <[email protected]>
Co-authored-by: silverwind <[email protected]>
Leaked per-job networks each hold a subnet of the daemon's address pool and nothing reclaimed them, so a host eventually fails every job with `all predefined address pools have been fully subnetted`. This is what CI hit in https://gitea.com/gitea/runner/actions/runs/742177.
- teardown no longer loses a container, and its network with it: a failed `ContainerRemove` was reported as success, a container whose id was never learned was skipped, and the daemon's own `AutoRemove` teardown was raced
- the idle cleanup reclaims what teardown cannot: networks carry `com.gitea.runner.uuid`, so a runner only touches its own, and a cutoff keeps a job starting during the pass out of scope
- pull failures reported mid-stream were discarded, surfacing later as a confusing `No such image`; they now propagate, and fall back to a local copy instead of failing the job
- `NetworkCreate` retries pool exhaustion briefly, then says which knobs to turn
- digest-pinned images are not re-pulled, and removal kills first so it never waits out Podman's stop timeout (measured 10.1s → 0.09s per container)
---------
Co-authored-by: bircni <[email protected]>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1124
Reviewed-by: bircni <[email protected]>
`reportStepError` reported every step error as FAILURE, including a `context.Canceled` from a docker file-command read cancelled at job finalization — non-deterministic red CI. Classify `context.Canceled` as an interruption instead (deferring to the job context), so a genuine cancel reports cancelled and a stray teardown cancellation is ignored, never a failure.
---------
Co-authored-by: bircni <[email protected]>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1095
Reviewed-by: bircni <[email protected]>
`containerReference.id` was cached from `Create()` and never re-validated, so a container torn down out-of-band (AutoRemove on an unexpected exit, daemon-side cleanup, sibling-job race in a parallel matrix) left a stale id behind. The next `Copy`/`Exec` then hit the daemon with that dead id and failed the otherwise-successful job with `Could not find the file /var/run/act/ in container <id>`.
`find()` now `ContainerInspect`s the cached id and clears it only on a definitive `NotFound`; transient errors trust the cache so cleanup pipelines don't abort on a daemon blip. Operations that need a live container (`copyContent`/`copyDir`/`CopyTarStream`/`exec`/`GetContainerArchive`) fail fast with a clear `container "<name>" does not exist` instead of the daemon's generic empty-id error.
---
This PR was written with the help of Claude Opus 4.7
---------
Co-authored-by: Nicolas <[email protected]>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1003
Reviewed-by: Nicolas <[email protected]>
Co-authored-by: silverwind <[email protected]>
Co-committed-by: silverwind <[email protected]>
Pin floating image tags:
- `golang` → `1.26-alpine3.23`
- `docker` dind variants → `29.5.2`
- `alpine` (basic stage + test fixture) → `3.23`
`ubuntu:24.04` and `scratch` left unchanged (no more-specific tag).
---
This PR was written with the help of Claude Opus 4.7
Reviewed-on: https://gitea.com/gitea/runner/pulls/992
Reviewed-by: Lunny Xiao <[email protected]>
Fixes#956.
Pseudo-TTY allocation is now an explicit, runner-wide opt-in via `runner.allocate_pty`, applied to both host and docker backends. Default is off, matching GitHub `actions/runner`.
```yaml
runner:
allocate_pty: false # default
```
**Before:** the host backend hardcoded `if true /* allocate Terminal */` and the docker backend used `term.IsTerminal(os.Stdout.Fd())`. As a result, `docker build` (and other TTY-aware tools) saw a TTY and emitted cursor-control redraw frames that flooded captured logs with thousands of duplicate-looking progress lines — only on host-mode runners in production, and on docker-mode runners when the daemon happened to be launched from a shell rather than a service.
**After:** both backends consult `Config.AllocatePTY`. The `term.IsTerminal` heuristic is gone, so behavior no longer depends on whether the daemon has a controlling terminal.
**Reproduction:** running `docker build` through `HostEnvironment.Exec` with output captured to a buffer:
| | Before (`if true`) | After (`AllocatePTY=false`) |
|---|---:|---:|
| bytes captured | 18,167 | 1,048 |
| ANSI CSI sequences | 556 | 0 |
| cursor-up `\e[1A` | 181 | 0 |
**Side fix:** `ptyWriter.AutoStop` is now `atomic.Bool`. The field is written from the exec goroutine after `cmd.Wait()` and read from the `copyPtyOutput` goroutine via `ptyWriter.Write`; existing tests never tripped the race detector because their commands produced no output before exit. The new host-mode test does.
---
This PR was written with the help of Claude Opus 4.7
---------
Co-authored-by: Lunny Xiao <[email protected]>
Co-authored-by: Nicolas <[email protected]>
Reviewed-on: https://gitea.com/gitea/runner/pulls/961
Reviewed-by: Nicolas <[email protected]>
Co-authored-by: silverwind <[email protected]>
Co-committed-by: silverwind <[email protected]>
Removes 88 `nolint` directives (386 → 298) via mechanical, zero-regression cleanups:
- **38 `bodyclose`** in `act/artifactcache/handler_test.go`: replaced by `defer resp.Body.Close()` after each HTTP call.
- **21 dead directives** (`gocyclo`, `dogsled`, `contextcheck`): none of these linters are enabled in `.golangci.yml`, so the directives were doing nothing.
- **29 `testifylint`** directives whose underlying issues were addressed by mechanical rewrites:
- `assert.Nil(t, err)` → `assert.NoError(t, err)`
- `assert.NotNil(t, err)` → `assert.Error(t, err)`
- `assert.Equal(t, true/false, x)` → `assert.True/False(t, x)`
- `assert.Equal(t, 0, len(x))` → `assert.Empty(t, x)`
- `assert.Equal(t, N, len(x))` → `assert.Len(t, x, N)`
- `assert.Len(t, x, 0)` → `assert.Empty(t, x)`
Many `testifylint` directives still apply because they flag `require-error` (i.e. testifylint wants `require.NoError` instead of `assert.NoError` for early bail-out). That's a behavior change (fail-fast vs continue) and out of scope for this purely mechanical cleanup — those can be addressed in a follow-up. Same for `expected-actual`, `equal-values`, `error-is-as`, and the remaining `nilnil` / `unparam` / `forbidigo` / `staticcheck` / `goheader` / `dupl` directives.
`golangci-lint run` is clean. Tests pass for all touched packages.
---
This PR was written with the help of Claude Opus 4.7
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/864
Reviewed-by: Lunny Xiao <[email protected]>
Co-authored-by: silverwind <[email protected]>
Co-committed-by: silverwind <[email protected]>
Closes#848. Addresses [GHSA-82g9-637c-2fx2](https://github.com/go-gitea/gitea/security/advisories/GHSA-82g9-637c-2fx2) and the follow-up points raised by @ChristopherHX and @haroutp in that thread.
The change is breaking only for `cache.external_server` which uses auth via a pre-shared secret.
## How auth works now
1. **Runner starts** → opens the embedded cache server on `:port`. Loads / creates a 32-byte HMAC signing key in `<cache-dir>/.secret`.
2. **Runner receives a task** → calls `handler.RegisterJob(ACTIONS_RUNTIME_TOKEN, repository)` before the job runs, defers a revoker that removes the credential on completion. Registrations are reference-counted so a stray re-register cannot revoke a live job.
3. **Job container runs `actions/cache`** → the toolkit sends `Authorization: Bearer $ACTIONS_RUNTIME_TOKEN` on every management call (`reserve`, `upload`, `commit`, `find`, `clean`). The cache server's middleware looks the token up in the registered-jobs map: miss → 401; hit → the job's repository is injected into the request context.
4. **Repository scoping** — every cache entry is stamped with `Repo` on reserve; `find`, `upload`, `commit` all verify the caller's repo matches. A job in repo A cannot see or poison a cache entry owned by repo B, even when both reach the server over the same docker bridge. GC dedup also groups by `(Repo, Key, Version)` so one repo can't age out another.
5. **Archive downloads** — `@actions/cache` does not attach Authorization when downloading `archiveLocation`, so the `find` response is a short-lived HMAC-signed URL: `…/artifacts/:id?exp=<unix>&sig=<hmac>`, 10-minute TTL, signature binds `cacheID:exp`. Tampered, expired, or foreign-secret URLs get 401.
6. **Defence-in-depth** — `ACTIONS_RUNTIME_TOKEN` is added to `task.Secrets` so the runner's log masker scrubs it from step output.
## `cache.external_server` (standalone `act_runner cache-server`)
Operators set `cache.external_secret` to the same value on the runner config and the `act_runner cache-server` config. The `cache-server` then runs with bearer auth on the cache API and exposes a control-plane at `POST /_internal/{register,revoke}` (gated by the shared secret). The runner pre-registers each task's `ACTIONS_RUNTIME_TOKEN` with the remote server before the job runs and revokes it on completion. Same per-job auth + repo scoping as the embedded handler, just over the network.
`cache-server` refuses to start without `cache.external_secret`; runner config load also fails when `cache.external_server` is set without `cache.external_secret`.
## User-facing changes
- **One-time cache miss after upgrade.** Pre-existing entries in `bolt.db` have no `Repo` stamp and won't match any job — they'll be evicted by the normal GC. First job per cache key rebuilds its cache.
- **`cache.external_server` deployments must add `cache.external_secret`.** Breaking change for anyone running a standalone `act_runner cache-server`: set the same `cache.external_secret` in both the runner config and the cache-server config. Without it neither side starts.
- **No config changes required for the default setup.** Runners using the embedded cache server (the common case) keep working without any yaml edits; the auth mechanism is invisible to workflows.
---
This PR was written with the help of Claude Opus 4.7
---------
Co-authored-by: Nicolas <[email protected]>
Co-authored-by: Christopher Homberger <[email protected]>
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/849
Reviewed-by: ChristopherHX <[email protected]>
silverwindandbircni
